SilverStone SG05-450 Spezifikationen

SUGO SERIES SG05

Install your 3.5” hard drive onto the bracket as shown and secure with screws, then reinstall the bracket into the chassis and secure with screws.Уста

Install your graphics card or expansion card.Установите графическую карту или карту расширения.Installieren Sie Ihre Grafik- oder andere Expansionskar

After all cables and wirings are connected, reinstall the top cover and secure it.Подключите все необходимые провода и кабели, после чего поставьте на

Press the area as shown to release the clips, then remove the front panel.Нажмите на указанные зажимы и снимите переднюю панель.Drücken Sie auf die

Remove the 4 screws holding the fan, and remove the fan from the interior of the chassis. Then reinstall the chassis by following the previous ste

July, 2010G11212370

1 Product OverviewSpecificationSG05Model No.MaterialMotherboardDrive BayCooling SystemExpansion SlotFront I/O PortPower SupplyExpansion CardLimitation

2Max. DC Output 300WLoad RangeMax.(Amps)Peak (Amps)Min.(Amps)Range (%)Ripple(mVp-p) Combined +3.3, +5V Combined +12V Input Voltage Input Frequency Ran

33.25 Bay3.5” HDD3.5” HDD TRAYFILTER BKTSLIM OPTICAL DRIVE TRAYSLIM OPTICAL DRIVE (SOLD SEPARATELY) PSU (300 / 450W)TOP COVEREXPANSION SLOTx 2MOTHERBO

Remove the screws holding the hard drive bracket with a screw driver as shown, then remove the cage outward from the chassis.С помощью отвертки открут

Press the area as shown to release the clips, then remove the front panel. Remove the screws holding the optical drive bracket with a screw driver

Remove the tab of optical drive bay with a screw driver. С помощью отвертки уберите накладку отсека для оптического привода. Entfernen Sie Klappe de

Install your motherboard into the chassis as shown and secure with included screws.Установите материнскую плату в корпус и закрепите ее прилагаемыми

Install your 2.5” hard drive onto the optical drive bracket as shown and secure with included screws. (the maximum thickness of 2.5” hard drive is